Bike Wall Mount - Horizontal Indoor Storage Rack for 1 Bicycle in Garage or Home - Cycling Hanger - Safe and Secure Holder, Hook for Bicycles - Hang Your Road, Mountain or Hybrid Bikes

Product Information

The Pro Bike Tool 3 Bike Wall Rack is a neat all-in-one solution to storing multiple bikes to help you save floor space.

Also, the rubber pads on the hooks at the end of each arm (meant to protect your bike’s frame) fell out almost immediately. And the rack should also be as unobtrusive as possible, at least when the bike’s not hanging on it—you don’t want your roommate or partner bashing their head on the rack while you’re out for a ride. If you can get it to work - or you're working with brick walls - then this is a solution that will display your bike like the centrepiece it is.To get your bike on this rack, you tip it back on its rear wheel and roll it forward until the front wheel sits in the rack, which is wide enough to accommodate even mountain-bike tires. The colorful Cycloc Solo, for instance, holds bikes so close to the wall that handlebars wider than 23 inches won’t fit, even with the optional extender kit. jaysa: I'll get no marks for style here, but our bikes hang off plastic-coated steel hooks screwed into ceiling joists. One arm can be higher than the other, which means that you can rest a bike on the rack even if it has a sloping top tube or no top tube at all.

Ease of loading bikes: You don’t have to go through a hassle while loading your bikes into the rack.Eventually, due to the garage temps varying from hot to cold, the rubber coating will start to come apart, you can recoat them with Plasti Dip, or you can cover them with small diameter pipe foam insulation. Simple tweaking of a 3mm Allen key (provided) in one of six boltheads on the side and arms takes just a minute to get more or less spot on, depending on whether you have a partner to give the 'up a bit, down a bit' guidance. However, I have now mounted them under a shelf and it works fine as here it does hold the centre of the rim, and the tyre width is sufficient to hold the grip against gravity. Anti-scuff mechanism: The hanger which holds the frame of your bike is wadded with plastic covering.

Designed in a way to optimize your floor space, therefore; you can mount this hanger in tight spaces to accommodate your bike.

Above all; while mounting the hanger, it is strongly advisable you either choose a stone, brick constructed wall or a concrete wall.

We've spent years figuring out the best way to stuff as many bikes as possible into the smallest space while also keeping them in good shape. It wouldn’t be impossible to pull over, but you’d have to be doing so intentionally, not accidentally knocking into the rack. The 451, listed here, is a 55mm wide hook and if that's not wide enough Park Tool also offers the 471 and 471XX to cover tyres as wide as 5 inches. Unlike some of the other vertical-storage options we tried, which require you to lift your bike well off the ground while simultaneously twisting its wheel to get it into a hook, the Steadyrack Classic Rack unfolds from the wall like an old-fashioned ironing board.

Also; you are strongly advised to mount the hanger on a surface made from cement, stone wall or stud. Mounting screws, anchors and necessary hardware, required for the installing process have been included with the packaging. Most work well with 12 to 26-inch bikes, which means you can also use them to keep your beach cruisers and mountain bikes neat and organized. This also means you can fit more bikes into the same space whilst maintaining easy access and ensuring the safety of yourself and the surrounding bikes on the wall. Installing a Steadyrack bicycle mount for your wall will maximise your storage area by utilising our patented 160-degree pivot feature, which will enable efficient storage and increase accessibility in tight spaces, such as your apartment hallway or balcony.