Teltonika RUTX50 Industrial 5G-Router

Product Information

Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received, connected band, IMSI, ICCID. The RUTX50 router from Teltonika provides a reliable, secure and practical solution and with the familiar RUTOS used by hundreds of thousands of customers with the popular 4G router range (RUT950, RUT955, RUT240, RUTX09, RUTX11, RUTX12, RUTX14) users will find the only difference is the super fast 5G Internet connection. Of course you might also notice the price because the cost of 5G modems is still pretty high so expect to pay a premium for the new Teltonika RUTX50 5G Router. RUTX50 Key Features Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

The Remote Management System (RMS) by Teltonika Networks allows you to be in control of your connected solution and consists of three main parts:Blazing fast 5G NR Sub-6GHz and 4G LTE-Advanced Pro Cat 20 cellular radio connectivity. 2.1 Gbps (DL)/ 900 Mbps (UL) TRB255 can be used to integrate modern and legacy industrial equipment into one solution via RS232, RS485 & Ethernet interfaces. WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SMTP, SSL v3, TLS, PPP, PPPoE, SSH, DHCP, SNMP, MQTT, Wake on LAN (WOL) The RUTX50 supports 5x 10/100/1000 Mbps Ethernet ports and its mobile bandwidth of 3.3 Gbps is the fastest of any single-modem Teltonika router. Dual-SIM cards are supported for failover/auto-switch purposes, adding to the router's versatility, and a real-time signal strength indicator is included to assist with external antenna positioning. It supports 4x4 MIMO antenna connections to allow for the strongest possible mobile signal.

Status LEDs: 3 x connection status LEDs, 3 x connection strength LEDs, 10 x Ethernet port status LEDs, 4 x WAN status LEDs, 1x Power LED, 2 x 2.4G and 5G WiFi LEDs The RUTX50 is an industrial 5G router designed to provide reliable, secure and high speed mobile broadband Internet connectivity for M2M / IoT remote management and monitoring applications. The Teltonika 4G router range includes the best selling RUT951, RUT956 and low cost RUT241 4G routers. Teltonika then launched the RUTX router range which provided a higher specification processor and advanced WiFi to cater for M2M and IoT applications with more demand for speed. Along with the new RUTX 4G routers came higher speed 4G modems, including CAT6 and CAT12 LTE modems for higher 4G speeds.RUTX50 is the new Industrial 5G router from Teltonika. It provides a high speed LTE 5G Internet connection using a 5G SIM card inserted into the SIM slot of the router. The embedded 5G Modem provides the connection to the 5G network for lightning fast 5G mobile broadband. This is delivered to the LAN via high speed, Gigabit Ethernet for wired connectivity and the RUTX50 router has built-in 802.11AC WiFi 5 to provide high speed WiFi hotspot for wireless users. The RUTX50 has 4 x SMA Female ports on the side for the connection of the supplied 4 x 5G Antennas (elbow joint, 5G paddle antenna) so this router can support the connection of alternative antennas. This means the RUTX50 can utilise a wide range of 4×4 MiMo antennas dependant upon the installation. Description Teltonika RUTX50 Industrial 5G LTE CAT20 Industrial Router WiFi5 (802.11ac Wave 2), GNSS , 5 x Gigabit Ethernet, Dual SIM x connection status LEDs, 3 x connection strength LEDs, 10 x Ethernet port status LEDs, 4 x WAN status LEDs, 1 x Power LED, 2 x 2.4G and 5G Wi-Fi LEDs

A wide range of software features like SMS control, Firewall, OpenVPN, IPSec, RMS ensures that data can be reached securely. x connection status LEDs, 3 x connection strength LEDs, 10 x Ethernet port status LEDs, 4 x WAN status LEDs, 1x Power LED, 2 x 2.4G and 5G WiFi LEDs DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC The first Teltonika 5G router launched in Sepetember 2022 was the long awaited RUTX50. This 5G router from Teltonika builds upon the success of the Teltonika 4G router range that is widely used in all types of industry for remote access and monitoring using 4G LTE cellular connectivity.The Teltonika RUTX50 is the new Industrial 5G router providing a high speed LTE 5G Internet connection using a 5G SIM card.

IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16) Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SMTP, SSL v3, TLS, PPP, PPPoE, SSH, DHCP, SNMP, MQTT, Wake on LAN (WOL) IKEv1, IKEv2, supports up to 5 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256) Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP

STANDARD ORDER CODES

Sub-6Ghz SA/NSA 2.1/3.3Gbps DL (4x4 MIMO), 900/600 Mbps UL (2x2); 4G (LTE) – LTE Cat 20 2.0Gbps DL, 200Mbps UL; 3G – 42 Mbps DL, 5.76Mbps UL